Gamebox 64HD Panduan Instalasi/Perakitan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi/Perakitan untuk Kartu Video Gamebox 64HD. Gamebox 64HD 11 halaman. For all standard n64 models
Halaman CetakRCP Flex Cable Additional Connections
STEP 2
Solder the flex contact to the N64 motherboard
location marked "5v" in silkscreen (shown above).
FAILURE TO MAKE THIS CONNECTION
PROPERLY WILL RESULT IN THE 64HD PCB FAILING
TO BOOT WHEN THE CONSOLE POWERS ON.
For N64 motherboard revisions 01-05 (shown
left). Use a small amount of 30 gauge wire to connect
the CTRL breakout pad on the RCP flex cable to PIN 16
on the PIF. The Reset pad isn't populated.
For motherboard revisions 06-09 please see the next page.
The motherboard revision can be found near
the cartridge slot (shown below).
Page 5