Gamebox 64HD Руководство по установке/монтажу - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке/монтажу для Видеокарта Gamebox 64HD. Gamebox 64HD 11 страниц. For all standard n64 models
Печатать страницуRCP Flex Cable Additional Connections
STEP 2
Solder the flex contact to the N64 motherboard
location marked "5v" in silkscreen (shown above).
FAILURE TO MAKE THIS CONNECTION
PROPERLY WILL RESULT IN THE 64HD PCB FAILING
TO BOOT WHEN THE CONSOLE POWERS ON.
For N64 motherboard revisions 01-05 (shown
left). Use a small amount of 30 gauge wire to connect
the CTRL breakout pad on the RCP flex cable to PIN 16
on the PIF. The Reset pad isn't populated.
For motherboard revisions 06-09 please see the next page.
The motherboard revision can be found near
the cartridge slot (shown below).
Page 5