HIKVISION DS-8100-S Series Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk DVR HIKVISION DS-8100-S Series. HIKVISION DS-8100-S Series 7 halaman.
Juga untuk HIKVISION DS-8100-S Series: Panduan Memulai Cepat (6 halaman), Panduan Instalasi (4 halaman), Panduan Memulai Cepat (6 halaman), Panduan Instalasi (4 halaman)
Halaman Cetak
Using the Front Panel Controls
Figure1. DVR Front Panel Controls
The controls on the front panel include:
1.
Power Button: Powers DVR on/off.
2.
IR Receiver: Receiver for IR remote.
3.
USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and
USB Hard Disk Drive (HDD).
4.
Status Indicators: Status indicators for different features of the DVR.
• Alarm: Alarm indicator turns red when a sensor alarm is detected.
• Ready: Ready indicator turns blue when DVR is functioning properly.
• Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red
when controlled by a keyboard and purple when IR remote and keyboard is used at the same
time.
• HDD: HDD indicator blinks red when data is being read from or written to HDD.
• Modem: Reserved
• TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.
• Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed.
The arm/disarm state can be initiated by pressing and holding on the ESC button for more than
3 seconds in Preview mode.
5.
Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses
include:
• Switching to the corresponding channel in Preview or PTZ Control mode.
• Inputting numbers and characters in Edit mode.
• Switching between different channels in Playback mode.
6.
Control Buttons:
Quick Start Guide - DS-8100-S Series DVR
5