- ページ 5

DVR HIKVISION DS-8100-S SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-8100-S Series 7 ページ。
HIKVISION DS-8100-S Series にも：クイック・スタート・マニュアル (6 ページ), インストレーション・マニュアル (4 ページ), クイック・スタート・マニュアル (6 ページ), インストレーション・マニュアル (4 ページ)

Using the Front Panel Controls

Figure1. DVR Front Panel Controls

The controls on the front panel include:

Power Button: Powers DVR on/off.

IR Receiver: Receiver for IR remote.

USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and

USB Hard Disk Drive (HDD).

Status Indicators: Status indicators for different features of the DVR.

• Alarm: Alarm indicator turns red when a sensor alarm is detected.

• Ready: Ready indicator turns blue when DVR is functioning properly.

• Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red

when controlled by a keyboard and purple when IR remote and keyboard is used at the same

time.

• HDD: HDD indicator blinks red when data is being read from or written to HDD.

• Modem: Reserved

• TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.

• Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed.

The arm/disarm state can be initiated by pressing and holding on the ESC button for more than

3 seconds in Preview mode.

Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses

include:

• Switching to the corresponding channel in Preview or PTZ Control mode.

• Inputting numbers and characters in Edit mode.

• Switching between different channels in Playback mode.

Control Buttons:

Quick Start Guide - DS-8100-S Series DVR