HIKVISION DS-8100-S Series 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} HIKVISION DS-8100-S Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-8100-S Series 7 페이지.
HIKVISION DS-8100-S Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 설치 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (6 페이지), 설치 매뉴얼 (4 페이지)

페이지 인쇄

Using the Front Panel Controls

Figure1. DVR Front Panel Controls

The controls on the front panel include:

Power Button: Powers DVR on/off.

IR Receiver: Receiver for IR remote.

USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and

USB Hard Disk Drive (HDD).

Status Indicators: Status indicators for different features of the DVR.

• Alarm: Alarm indicator turns red when a sensor alarm is detected.

• Ready: Ready indicator turns blue when DVR is functioning properly.

• Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red

when controlled by a keyboard and purple when IR remote and keyboard is used at the same

time.

• HDD: HDD indicator blinks red when data is being read from or written to HDD.

• Modem: Reserved

• TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.

• Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed.

The arm/disarm state can be initiated by pressing and holding on the ESC button for more than

3 seconds in Preview mode.

Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses

include:

• Switching to the corresponding channel in Preview or PTZ Control mode.

• Inputting numbers and characters in Edit mode.

• Switching between different channels in Playback mode.

Control Buttons:

Quick Start Guide - DS-8100-S Series DVR