Align MR25 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Quadcopters Align MR25. Align MR25 11 halaman. Racing quad w/radiolink at9 radio controller

Halaman Cetak

FAQ

Lost connection with radio controller

If you're the drone cannot response to the radio controller stick travel, the connection between

radio controller and receiver may lost and you can try to re-bind them by following the procedure

below:

Press the switch inside the receiver twice with small screwdrivers to make LED indicator turns RED to set the

control mode to Conventional Mode. (Skip this step if it is default in Red light)

Use the small screwdrivers to press and hold the switch inside the receiver until it is flashing with light in Blue and

Purple, Switch on the radio controller, it will start searching for available receiver. Receiver will stop flashing while the

bind process complete and the radio controller will the signal strength on the screen

Radio Controller Parameters

If you reset your radio controller (AT9) setting, you can apply the setting below:

1) Press and Hold the controller wheel (With wordings

"PUSH") to unlock the manual. Press and Hold Mode

Button to go into basic menu page

2) [STK-MODE] = 2 (Stick Mode)

[LockScreen] = 30s (Time to lock screen)