Align MR25 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Quadcopteri Align MR25. Align MR25 11. Racing quad w/radiolink at9 radio controller
FAQ
Lost connection with radio controller
If you're the drone cannot response to the radio controller stick travel, the connection between
radio controller and receiver may lost and you can try to re-bind them by following the procedure
below:
Press the switch inside the receiver twice with small screwdrivers to make LED indicator turns RED to set the
control mode to Conventional Mode. (Skip this step if it is default in Red light)
Use the small screwdrivers to press and hold the switch inside the receiver until it is flashing with light in Blue and
Purple, Switch on the radio controller, it will start searching for available receiver. Receiver will stop flashing while the
bind process complete and the radio controller will the signal strength on the screen
Radio Controller Parameters
If you reset your radio controller (AT9) setting, you can apply the setting below:
1) Press and Hold the controller wheel (With wordings
"PUSH") to unlock the manual. Press and Hold Mode
Button to go into basic menu page
9
2) [STK-MODE] = 2 (Stick Mode)
[LockScreen] = 30s (Time to lock screen)
Copyright@2015 HeliPal.com. All Rights Reserved