Align MR25 사용자 설명서 - 페이지 9

{카테고리_이름} Align MR25에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align MR25 11 페이지. Racing quad w/radiolink at9 radio controller

FAQ

If you're the drone cannot response to the radio controller stick travel, the connection between

radio controller and receiver may lost and you can try to re-bind them by following the procedure

below:

Press the switch inside the receiver twice with small screwdrivers to make LED indicator turns RED to set the

control mode to Conventional Mode. (Skip this step if it is default in Red light)

Use the small screwdrivers to press and hold the switch inside the receiver until it is flashing with light in Blue and

Purple, Switch on the radio controller, it will start searching for available receiver. Receiver will stop flashing while the

bind process complete and the radio controller will the signal strength on the screen

If you reset your radio controller (AT9) setting, you can apply the setting below:

1) Press and Hold the controller wheel (With wordings

"PUSH") to unlock the manual. Press and Hold Mode

Button to go into basic menu page

2) [STK-MODE] = 2 (Stick Mode)

[LockScreen] = 30s (Time to lock screen)