Brother PT-E500 Panduan Pengaturan Cepat - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pembuat label Brother PT-E500. Brother PT-E500 46 halaman. Electronic labeling system
Juga untuk Brother PT-E500: Panduan Operator (6 halaman)
Halaman Cetak
GETTING STARTED
Feed Only
This function will advance the tape approximately 24.5mm resulting in a blank label sticking
out of the tape cassette. This action is recommended when using Fabric tapes, which should
be cut using scissors.
1
Press the Feed & Cut key.
"Feed & Cut?" will appear on the LCD display.
2
Using the
The message "Feeding Tape... Please Wait" appears while the tape is fed.
To exit or cancel this function press Esc.
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1,
-2) to make the screen easier to read. The default setting is "0".
1
Press the Menu key, select "Adjustment" using the
or Enter key.
2
Select "LCD Contrast" using the
key.
3
Press the OK or Enter key.
• Press the Esc key to return to the previous step.
• Pressing the Space key on the contrast setting screen sets the contrast to the default value "0".
Backlight
You can change the backlight setting either to on or off.
The display is easier to see with the backlight on. The default setting is on.
1
Press the Menu key, and then select "Advanced" using the
Enter key.
2
Select "Backlight" using the
3
Select "On" or "Off" using the
• Power can be saved when the backlight is turned off.
• The backlight will automatically turn off after 10 seconds of inactivity, press any key to re-
enable it. During printing, the backlight is disabled. The backlight turns on during data
transmissions.
30
LCD Display
or
key to select the "Feed Only", and then press either OK or Enter key.
LCD Display
or
or
key, and then set the value using the
key, and press the OK or Enter key.
or
key, and press the OK or Enter key.
or
key, and then press the OK
or
key. Press OK or
or