Brother PT-E500 Panduan Pengaturan Cepat - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pembuat label Brother PT-E500. Brother PT-E500 46 halaman. Electronic labeling system
Juga untuk Brother PT-E500: Panduan Operator (6 halaman)
Halaman Cetak
EDITING A LABEL
You can select six different types of labeling applications.
GENERAL
Labels printed with this mode can be used for general purposes. In this
mode you can specify the following items.
• Label Length: Auto, 25 mm - 999 mm
• Orientation:
When the GENERAL mode is selected, you can press the Shift key and
then press the Enter key to add a new block.
FACEPLATE
Labels printed with this mode can be used to identify various faceplates.
Block of text is evenly spaced on a single label. In this mode, you can
specify the following items.
• Label Length: 50 mm, 25 mm - 999 mm
• # of Blocks: 1, 1 - 5
• Orientation:
CABLE WRAP
Labels printed with this mode can be wrapped around a cable or wire.
In the CABLE WRAP mode, the text is rotated 90
printed, you can also specify the following items.
• UOM: Dia(Ø) (Custom Diameter), Length (Custom Length), CAT5/6,
CAT6e, COAX, AWG
• Value: Depending on UOM
• Repeat: On, Off
Text: Type in single or multiple lines of data
When using Flexible ID Tape:
• We recommend using Flexible ID Tape for Cable Wrap labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
• When wrapping labels around cylindrical
objects, the diameter (1) of the object should be
at least 3 mm.
• The overlapping (2) ends of the label or the label
flag should be at least 5 mm.
32
Selecting a Labeling Application Type
Selecting a Labeling Application Type
(Horizontal),
(Horizontal),
(Vertical)
(Vertical)
°
counterclockwise and
1
Horizontal
ABCDE
Vertical
1 block
2 blocks
2