Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak
Fujitsu ETERNUS DX Disk Panduan Konfigurasi
Chapter 1
Setup Procedure for Emulex Converged Network Adapter Cards
1.2
Setting Up the Converged Network Adapter Cards
1.2.2

Setting Up SAN Boot

The following describes the procedure when performing SAN Boot.
Depending on the Converged Network Adapter card used, the actual on-screen Converged Network Adapt-
er card information may differ from that in the screenshots shown in this manual.
1
Turn on the server, and press the [Alt] + [E] keys while the following message is displayed.
Emulex OneConnect FCoE BIOS Utility starts.
!!! Emulex OneConnect FCoE BIOS !!! , Version xxxxxxxx
Copyright(c) 1997-2010 Emulex. All rights reserved.
Press <Alt E> or <Ctrl E> to enter Emulex BIOS configuration.
utility. Press <s> to skip Emulex BIOS
2
Enter the number of the Converged Network Adapter card for which SAN Boot is to be set and press the
[Enter] key.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
You Will be prompted to reboot for all changes to take effect.
1. OCexxxxx-F:
2. OCexxxxx-F:
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
==> 1
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware
Emulex OneConnect FCoE BIOS Utility, xxxxxxxx
This utility displays and saves changes when selected.
Emulex Adapter in the System:
Bus:xx Dev:xx Func:xx
Bus:xx Dev:xx Func:xx
Enter <Esc> to exit
< / > to Highlight, <Enter> to Select
Copyright (c) 1997-2009 Emulex. All rights reserved.
Copyright 2015 FUJITSU LIMITED
WWPN:
xxxxxxxxxxxxxxxx
WWPN:
xxxxxxxxxxxxxxxx
<PageDn> to Next Page
10
®
ESX
P3AM-4772-11ENZ0