Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 15

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 24 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
C
R
LEANING THE
OLLERS WITH THE
The cleaning sheets are designed to remove only loose paper dust and ink
from the rollers. Use them approximately every 10,000 sheets scanned.
They are to be used in between the thorough cleanings of the scanner.
Using the cleaning sheets does not take the place of the more com-
plete cleanings described later in this section
•
Turn off the scanner.
•
Access the Offline Feed Test by following the steps below.
Open the Pre-Imprinter Cover
While pressing the Scanner
Scan
S
B
, press the
CAN
UTTON
P
B
OWER
UTTON
scanner on.
Note:
The scanner Function Number
Display will display the items
to the right.
Stop pressing the S
CAN
Close the Pre-Imprinter Cover.
•
Set the Hopper Guides to the
B4 width.
•
Pull out the Stacker
Extension and adjust it to the
length of the cleaning sheet.
fi-5900C & fi-5950 C
C
S
LEANING
to turn the
B
.
UTTON
Stacker
Extension
R
ONSUMABLE
EPLACEMENT AND
HEETS
Pre-Imprinter
Cover
C
I
LEANING
NSTRUCTIONS
15