Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 24 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
fi-5900C & fi-5950 C
ONSUMABLE
16
R
C
EPLACEMENT AND
LEANING
C
R
LEANING THE
OLLERS WITH THE
Protective
Paper
Left Hopper
Guide
Cleaning
Sheet
I
NSTRUCTIONS
C
LEANING
•
Remove the protective paper
from the cleaning sheet.
Cleaning
Sheet
•
Place the cleaning sheet on the
Hopper against the Left Hopper
Guide, adhesive side up to
clean the Upper Transport
Path.
Cleaning
Sheet
•
Press the Scanner S
Scan
•
The Function Number Display
will change as shown to the left
and the cleaning sheet is fed
through the scanner.
•
Place the same cleaning sheet
on the Hopper against the
Right Hopper Guide, adhesive
side up.
•
Press the Scanner S
Right Hopper
Guide
B
UTTON
•
The cleaning sheet is fed
through the scanner.
•
Repeat the previous steps with
the adhesive side face down to
clean the lower Transport Path.
S
(
.)
HEETS
CONT
B
CAN
UTTON
3 times.
CAN
Scan
3 times again.