Fujitsu M3093GX Panduan Operator - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu M3093GX. Fujitsu M3093GX 50 halaman. Departmental document scanner
Juga untuk Fujitsu M3093GX: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Panduan Petunjuk Pembersihan (12 halaman), Prosedur Instalasi (5 halaman)

CHAPTER 4 OPERATIONS

4.2 Reading a Document in Flatbed Mode

4.3 Reading Documents in ADF Mode

Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the

flat-bed mode, each document is placed on the document bed and is read one by one. In ADF

mode, documents are fed and read automatically.

This section explains how to turn on the power and how to read documents.

NOTICE: If the "Check" indicator blinks in four seconds period, clean the ADF in accordance

with the section 5.3.

NOTICE: If the top 3 mm of the read area isn't left blank (grounding color) by specifying a

drop-out color, read the document by selecting photo.

4.1 Turning on the Power

This section explains how to turn on the power.

Press "I" on the power switch. When the power is turned on, the

power indicator is lit.

Press "O " on the power switch to turn off the power.

Power OFF

Power switch

Power ON

4 – 1