Fujitsu M3093GX Panduan Operator - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu M3093GX. Fujitsu M3093GX 50 halaman. Departmental document scanner
Juga untuk Fujitsu M3093GX: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Panduan Petunjuk Pembersihan (12 halaman), Prosedur Instalasi (5 halaman)
Halaman Cetak
4.2 Reading a Document in Flatbed Mode
4.2.1 Reading a standard-size document
4 – 2
This section explains how to read a document placed on the document
bed.
If the size of the document is smaller than the document bed, read the
document using the following procedure:
1
Open the document cover.
2
Place the document face down on the document board. Correct
any curled or folded parts of the document.
3
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
4
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
5
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
6
Read the document. Do not press on or open the document cover
during the read operation.
7
After reading, open the document cover to remove the document.