Fujitsu M3093GX Operatör El Kitabı - Sayfa 21
Tarayıcı Fujitsu M3093GX için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Fujitsu M3093GX 50 sayfaları. Departmental document scanner
Ayrıca Fujitsu M3093GX için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Temizlik Talimatları Kılavuzu (12 sayfalar), Kurulum Prosedürü (5 sayfalar)
Sayfayı Yazdır
4.2 Reading a Document in Flatbed Mode
4.2.1 Reading a standard-size document
4 – 2
This section explains how to read a document placed on the document
bed.
If the size of the document is smaller than the document bed, read the
document using the following procedure:
1
Open the document cover.
2
Place the document face down on the document board. Correct
any curled or folded parts of the document.
3
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
4
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
5
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
6
Read the document. Do not press on or open the document cover
during the read operation.
7
After reading, open the document cover to remove the document.