Fujitsu M3093GX 운영자 매뉴얼 - 페이지 20

{카테고리_이름} Fujitsu M3093GX에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M3093GX 50 페이지. Departmental document scanner
Fujitsu M3093GX에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 청소 지침 매뉴얼 (12 페이지), 설치 절차 (5 페이지)

페이지 인쇄
Fujitsu M3093GX 운영자 매뉴얼

CHAPTER 4 OPERATIONS

4.1 Turning on the Power

4.2 Reading a Document in Flatbed Mode
4.3 Reading Documents in ADF Mode
Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the
flat-bed mode, each document is placed on the document bed and is read one by one. In ADF
mode, documents are fed and read automatically.
This section explains how to turn on the power and how to read documents.
NOTICE: If the "Check" indicator blinks in four seconds period, clean the ADF in accordance
with the section 5.3.
NOTICE: If the top 3 mm of the read area isn't left blank (grounding color) by specifying a
drop-out color, read the document by selecting photo.
4.1 Turning on the Power
This section explains how to turn on the power.
Press "I" on the power switch. When the power is turned on, the
power indicator is lit.
Press "O " on the power switch to turn off the power.
Power OFF
Power switch
Power ON
4 – 1