Brother Business Smart MFC-J4510dw Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Cetak Brother Business Smart MFC-J4510dw. Brother Business Smart MFC-J4510dw 29 halaman. Quick setup guide - spanish
Juga untuk Brother Business Smart MFC-J4510dw: Manual (36 halaman), Manual (22 halaman), Panduan Keamanan Produk (17 halaman), Manual (13 halaman), Manual (22 halaman), Panduan Pengaturan Cepat (47 halaman), Manual (18 halaman), Panduan Pengaturan Cepat (47 halaman), Brosur & Spesifikasi (4 halaman), Panduan Keamanan Produk (20 halaman), Spesifikasi (2 halaman), Panduan Pengaturan Cepat (47 halaman), Panduan Keamanan Produk (25 halaman), (Spanyol) Panduan Guia De Web Connect (38 halaman), Manual (Spanyol) (24 halaman), (Bahasa Inggris) Panduan Panduan Keamanan Produk (16 halaman), Manual (Spanyol) (11 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (47 halaman)

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

NOTE

Make sure you install the Introductory Ink

Cartridges included with your machine first.

Make sure that the power is turned on.

NOTE

You can adjust the angle of the control panel by

lifting it. When lowering the control panel, make

sure you push the release button a that is

located behind the mark.

Open the ink cartridge cover a.

Remove the orange protective part.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

• DO NOT touch the cartridge in the area

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

your skin or clothing, wash with soap or

detergent at once.

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker colour with the

cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed close

the ink cartridge cover.