Fujitsu ETERNUS DX100 S3 Konfigurasi Manual Koneksi Server - Halaman 10

Jelajahi secara online atau unduh pdf Konfigurasi Manual Koneksi Server untuk Penyimpanan Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 12 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX100 S3: Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Setup Manual (15 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Chapter 2

Setting Up the ETERNUS DX

2.2

2.1.6

Allocating LUN Groups (Setting the Host Affinity)

Allocate the relationship between registered FCoE hosts (WWN), CA port groups, and LUN groups using the

Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the ETER-

NUS DX from each server.

Refer to "Connectivity Management" in "ETERNUS Web GUI User's Guide" for details, and set the LUN groups.

If the one-to-one relationship between the WWNs and Converged Network Adapter cards cannot be deter-

mined, the Host Affinity may not be set correctly.

In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX

logical disks.

2.2

Specific Settings

Specific settings for the OS and connection configuration are not required.

2.2.1

Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset

group settings do not need to be changed.

2.3

Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS

DX to the server.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-7982-05ENZ0