- ページ 10

ストレージ Fujitsu ETERNUS DX100 S3のPDF 設定マニュアルサーバー接続をオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX100 S3 12 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3 にも：設定マニュアルサーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (13 ページ), セットアップマニュアル (15 ページ), 安全上のご注意 (12 ページ)

Chapter 2

Setting Up the ETERNUS DX

2.2

2.1.6

Allocating LUN Groups (Setting the Host Affinity)

Allocate the relationship between registered FCoE hosts (WWN), CA port groups, and LUN groups using the

Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the ETER-

NUS DX from each server.

Refer to "Connectivity Management" in "ETERNUS Web GUI User's Guide" for details, and set the LUN groups.

If the one-to-one relationship between the WWNs and Converged Network Adapter cards cannot be deter-

mined, the Host Affinity may not be set correctly.

In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX

logical disks.

2.2

Specific Settings

Specific settings for the OS and connection configuration are not required.

2.2.1

Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset

group settings do not need to be changed.

2.3

Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS

DX to the server.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-7982-05ENZ0