Fujitsu ETERNUS DX100 S3 Configuration Manual Server Connection - Page 10

Browse online or download pdf Configuration Manual Server Connection for Storage Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 12 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX100 S3: Configuration Manual Server Connection (12 pages), Configuration Manual (28 pages), Configuration Manual (13 pages), Setup Manual (15 pages), Safety Precautions (12 pages)

Print Page

Chapter 2

Setting Up the ETERNUS DX

2.2

2.1.6

Allocating LUN Groups (Setting the Host Affinity)

Allocate the relationship between registered FCoE hosts (WWN), CA port groups, and LUN groups using the

Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the ETER-

NUS DX from each server.

Refer to "Connectivity Management" in "ETERNUS Web GUI User's Guide" for details, and set the LUN groups.

If the one-to-one relationship between the WWNs and Converged Network Adapter cards cannot be deter-

mined, the Host Affinity may not be set correctly.

In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX

logical disks.

2.2

Specific Settings

Specific settings for the OS and connection configuration are not required.

2.2.1

Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset

group settings do not need to be changed.

2.3

Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS

DX to the server.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-7982-05ENZ0