Brother Inkjet MFC-J4710DW Panduan Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother Inkjet MFC-J4710DW. Brother Inkjet MFC-J4710DW 47 halaman. Quick setup guide - spanish
Juga untuk Brother Inkjet MFC-J4710DW: Manual (36 halaman), Manual (22 halaman), Panduan Keamanan Produk (17 halaman), Manual (13 halaman), Manual (13 halaman), Panduan Keamanan Produk (20 halaman), Spesifikasi (2 halaman), Panduan Pengaturan Cepat (47 halaman), (Spanyol) Panduan Guia De Web Connect (38 halaman), Manual (Spanyol) (24 halaman), (Bahasa Inggris) Panduan Panduan Keamanan Produk (16 halaman), Manual (Spanyol) (12 halaman), Manual (Spanyol) (11 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (47 halaman)

Gently put the paper into the paper tray (for

MFC-J4710DW, tray #1) print side down and

top edge first.

IMPORTANT

Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

Gently adjust the paper guides to fit the paper.

Make sure that the paper guides touch the

edges of the paper.

Check that the paper is flat in the tray and

below the maximum paper mark a. Close the

output paper tray cover.

NOTE

• For printing and copying on special media,

• (MFC-J4710DW)

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

open the manual feed slot a on the back of the

machine. Feed only one sheet at a time of

Ledger, Legal, A3, envelopes, or thicker paper

when using the manual feed slot.

For details, see Loading paper in the manual

feed slot in chapter 2 of the Basic User's

Guide.

For information about tray #2 (the lower tray),

see Loading paper in paper tray #2 in chapter

2 of the Basic User's Guide.