AEG OKO_SANTO SUPER Panduan Petunjuk Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kulkas AEG OKO_SANTO SUPER. AEG OKO_SANTO SUPER 32 halaman. Automatic refrigerator
Juga untuk AEG OKO_SANTO SUPER: Panduan Petunjuk Pengoperasian (21 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Panduan Petunjuk Pengoperasian (22 halaman)

Temperature Display

The temperature display can indicate several pieces of information.

• During normal operation, the temperature currently present in the

refrigerator (ACTUAL temperature) is displayed, the corresponding

light illuminates.

• If the temperature in the refrigerator is warmer than the display

range of the temperature display, all the lights in the temperature

display are extinguished.

• If the temperature in the refrigerator is colder than the display range

of the temperature display, then the light for the lowest temperature

(+2) continues to illuminate.

• When the temperature is being adjusted, the temperature currently

set flashes (DESIRED temperature).

• If there is a malfunction in the appliance that prevents the tempera-

ture from being further measured, all the lights on the temperature

display flash.

Before connecting the appliance to the mains and putting it into ope-

ration for the first time, leave the appliance to stand for 30 minutes if

was transported upright. After transport on its side, the appliance must

be left to stand for 4 hours before putting it into operation. This is

necessary to allow the oil to flow back into the compressor. Otherwise

the compressor may be damaged.

0 Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Maintenance and Cleaning").

818 1701-00/7