AEG OKO_SANTO SUPER Manual de Instruções - Página 17
Procurar online ou descarregar pdf Manual de Instruções para Frigorífico AEG OKO_SANTO SUPER. AEG OKO_SANTO SUPER 32 páginas. Automatic refrigerator
Também para AEG OKO_SANTO SUPER: Manual de Instruções (21 páginas), Manual de Instruções (32 páginas), Manual de Instruções (22 páginas)
Imprimir página
Temperature Display
The temperature display can indicate several pieces of information.
• During normal operation, the temperature currently present in the
refrigerator (ACTUAL temperature) is displayed, the corresponding
light illuminates.
• If the temperature in the refrigerator is warmer than the display
range of the temperature display, all the lights in the temperature
display are extinguished.
• If the temperature in the refrigerator is colder than the display range
of the temperature display, then the light for the lowest temperature
(+2) continues to illuminate.
• When the temperature is being adjusted, the temperature currently
set flashes (DESIRED temperature).
• If there is a malfunction in the appliance that prevents the tempera-
ture from being further measured, all the lights on the temperature
display flash.
Prior to Initial Start-Up
Before connecting the appliance to the mains and putting it into ope-
1
ration for the first time, leave the appliance to stand for 30 minutes if
was transported upright. After transport on its side, the appliance must
be left to stand for 4 hours before putting it into operation. This is
necessary to allow the oil to flow back into the compressor. Otherwise
the compressor may be damaged.
0 Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Maintenance and Cleaning").
818 1701-00/7
17