AEG OKO_SANTO SUPER 사용 설명서 - 페이지 17

{카테고리_이름} AEG OKO_SANTO SUPER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO_SANTO SUPER 32 페이지. Automatic refrigerator
AEG OKO_SANTO SUPER에 대해서도 마찬가지입니다: 사용 설명서 (21 페이지), 사용 설명서 (32 페이지), 사용 설명서 (22 페이지)

페이지 인쇄

Temperature Display

The temperature display can indicate several pieces of information.

• During normal operation, the temperature currently present in the

refrigerator (ACTUAL temperature) is displayed, the corresponding

light illuminates.

• If the temperature in the refrigerator is warmer than the display

range of the temperature display, all the lights in the temperature

display are extinguished.

• If the temperature in the refrigerator is colder than the display range

of the temperature display, then the light for the lowest temperature

(+2) continues to illuminate.

• When the temperature is being adjusted, the temperature currently

set flashes (DESIRED temperature).

• If there is a malfunction in the appliance that prevents the tempera-

ture from being further measured, all the lights on the temperature

display flash.

Prior to Initial Start-Up

Before connecting the appliance to the mains and putting it into ope-

ration for the first time, leave the appliance to stand for 30 minutes if

was transported upright. After transport on its side, the appliance must

be left to stand for 4 hours before putting it into operation. This is

necessary to allow the oil to flow back into the compressor. Otherwise

the compressor may be damaged.

0 Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Maintenance and Cleaning").

818 1701-00/7