AEG CHDF 6260 Petunjuk Pengoperasian dan Pemasangan - Halaman 17

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi AEG CHDF 6260. AEG CHDF 6260 21 halaman. Electrolux cooktop user manual
Juga untuk AEG CHDF 6260: Petunjuk Pengoperasian dan Pemasangan (21 halaman), Panduan Pengoperasian dan Instalasi (21 halaman), Panduan Pengoperasian dan Instalasi (22 halaman), Petunjuk Pengoperasian dan Pemasangan (23 halaman), Petunjuk Pengoperasian dan Pemasangan (22 halaman)

Installing the fume extractor hood in the wall unit - extractor

version (Filter version with carbon filter)

• Apply the drilling template to the inside wall of the wall unit on the

right and left sides, and mark out and predrill Ø 2 mm mounting

holes as well as 2 x Ø 6 mm - 5 mm depth holes for the mounting

claws (installation aids).

• Unscrew the ventilation grill mounted on the appliance (1 screw),

apply the exhaust air union prepared to the required exhaust air

diameter, and twist it to the right to its fullest extent (so that it is

retained).

• Fully withdraw the vapour catcher of the hood.

• Important: Detach and insert the grease filters only when the

vapour catcher is fully withdrawn.

Remove the grease filters. First remove the rear and then the front

grease filter.

• For 19 mm side walls, the spacer discs clipped in on the appliance

body must be taken out. Mount the hood with 4 or 6 x Ø 4 mm

screws. Fig. 7.

Fig. 7

• Insert the hood in the furniture housing and engage both mounting

claws (installation aids) on the right and left sides in the side wall

of the wall unit and firmly hold the hood for further mounting.

Then fix the hood with the 4 or 6 x Ø 4 mm screws supplied.

• Refit the grease filters. Push-in the vapour catcher.