AEG CHDF 6260 Petunjuk Pengoperasian dan Pemasangan - Halaman 19

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi AEG CHDF 6260. AEG CHDF 6260 21 halaman. Electrolux cooktop user manual
Juga untuk AEG CHDF 6260: Petunjuk Pengoperasian dan Pemasangan (21 halaman), Panduan Pengoperasian dan Instalasi (21 halaman), Panduan Pengoperasian dan Instalasi (22 halaman), Petunjuk Pengoperasian dan Pemasangan (23 halaman), Petunjuk Pengoperasian dan Pemasangan (22 halaman)

AEG CHDF 6260 Petunjuk Pengoperasian dan Pemasangan
Removing the hood from the wall unit
If, for technical reasons (extractor version/filter version conversion) the
fume extractor hood has to be removed from the wall unit, proceed as
follows:
• Fully withdraw the vapour catcher and remove the grease filter.
• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).
• To loosen both mounting claws (installation aids), place a max 3
mm dia. Phillips screw-driver in the spring opening and
simultaneously press the springs inwards (towards the appliance
housing). Fig. 10.
Fig. 10
Important: Hold the hood firmly!
Adjusting the extractor part (E - Fig. 1) - Fig. 11
On wall units with a body depth of 275 mm to 335 mm, the vapour
catcher depth can be adjusted as follows:
• Remove both grease filters.
• Loosen the screws on both end-stop brackets and set the vapour
catcher depth (min. 275 mm, max. 335 mm).
• Refit the screws.
• Refit the grease filters.
Fig. 11
85