AEG CHDF 6260 Operating And Installation Instructions - Page 19

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood AEG CHDF 6260. AEG CHDF 6260 21 pages. Electrolux cooktop user manual
Also for AEG CHDF 6260: Operating And Installation Instructions (21 pages), Operating And Installation Manual (21 pages), Operating And Installation Manual (22 pages), Operating And Installation Instructions (23 pages), Operating And Installation Instructions (22 pages)

AEG CHDF 6260 Operating And Installation Instructions
Removing the hood from the wall unit
If, for technical reasons (extractor version/filter version conversion) the
fume extractor hood has to be removed from the wall unit, proceed as
follows:
• Fully withdraw the vapour catcher and remove the grease filter.
• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).
• To loosen both mounting claws (installation aids), place a max 3
mm dia. Phillips screw-driver in the spring opening and
simultaneously press the springs inwards (towards the appliance
housing). Fig. 10.
Fig. 10
Important: Hold the hood firmly!
Adjusting the extractor part (E - Fig. 1) - Fig. 11
On wall units with a body depth of 275 mm to 335 mm, the vapour
catcher depth can be adjusted as follows:
• Remove both grease filters.
• Loosen the screws on both end-stop brackets and set the vapour
catcher depth (min. 275 mm, max. 335 mm).
• Refit the screws.
• Refit the grease filters.
Fig. 11
85