AEG CHDF 6260 Panduan Pengoperasian dan Instalasi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kap Ventilasi AEG CHDF 6260. AEG CHDF 6260 22 halaman. Electrolux cooktop user manual
Juga untuk AEG CHDF 6260: Petunjuk Pengoperasian dan Pemasangan (21 halaman), Petunjuk Pengoperasian dan Pemasangan (21 halaman), Panduan Pengoperasian dan Instalasi (21 halaman), Petunjuk Pengoperasian dan Pemasangan (23 halaman), Petunjuk Pengoperasian dan Pemasangan (22 halaman)

Removing the hood from the wall unit

If, for technical reasons (extractor version/filter version conversion) the

fume extractor hood has to be removed from the wall unit, proceed as

follows:

• Fully withdraw the vapour catcher and remove the grease filter.

• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 10.

Fig. 10

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 11

On wall units with a body depth of 275 mm to 335 mm, the vapour

catcher depth can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the vapour

catcher depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 11