- ページ 20

換気フード AEG CHDF 6260のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。AEG CHDF 6260 22 ページ。 Electrolux cooktop user manual
AEG CHDF 6260 にも：操作およびインストール手順 (21 ページ), 操作およびインストール手順 (21 ページ), 操作および設置マニュアル (21 ページ), 操作およびインストール手順 (23 ページ), 操作およびインストール手順 (22 ページ)

Removing the hood from the wall unit

If, for technical reasons (extractor version/filter version conversion) the

fume extractor hood has to be removed from the wall unit, proceed as

follows:

• Fully withdraw the vapour catcher and remove the grease filter.

• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 10.

Fig. 10

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 11

On wall units with a body depth of 275 mm to 335 mm, the vapour

catcher depth can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the vapour

catcher depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 11