AEG CHDF 6260 운영 및 설치 매뉴얼 - 페이지 20

{카테고리_이름} AEG CHDF 6260에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG CHDF 6260 22 페이지. Electrolux cooktop user manual
AEG CHDF 6260에 대해서도 마찬가지입니다: 작동 및 설치 지침 (21 페이지), 작동 및 설치 지침 (21 페이지), 운영 및 설치 매뉴얼 (21 페이지), 작동 및 설치 지침 (23 페이지), 작동 및 설치 지침 (22 페이지)

Removing the hood from the wall unit

If, for technical reasons (extractor version/filter version conversion) the

fume extractor hood has to be removed from the wall unit, proceed as

follows:

• Fully withdraw the vapour catcher and remove the grease filter.

• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 10.

Fig. 10

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 11

On wall units with a body depth of 275 mm to 335 mm, the vapour

catcher depth can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the vapour

catcher depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 11