DG FPGA Pengaturan - Halaman 12

Jelajahi secara online atau unduh pdf Pengaturan untuk Perangkat Keras Komputer DG FPGA. DG FPGA 14 halaman.
Juga untuk DG FPGA: Pengaturan (5 halaman), Pengaturan (20 halaman), Pengaturan (8 halaman), Pengaturan (10 halaman), Pengaturan (18 halaman)

Halaman Cetak
DG FPGA Pengaturan
dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
8) Check LED status on FPGA board. The description of LED is as follows.
GPIO LED
0
1
2
3
9) After programming completely, LED[0] and LED[1] turn ON until finishing PCIe
initialization process. After that, LED[1] changes to OFF when PCIe completes
initialization process.
15-Jul-21
Table 2-1 LED Definition
ON
Normal operation
System is busy
IP Error detect
Data verification fail Normal operation
Figure 2-10 LED status after finishing PCIe initialization
1) PCIe Clock or system Clock is not locked.
2) Reset button is pressed.
Idle status
Normal operation
OFF
Page 12