DG FPGA 설정 - 페이지 12

{카테고리_이름} DG FPGA에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. DG FPGA 14 페이지.
DG FPGA에 대해서도 마찬가지입니다: 설정 (5 페이지), 설정 (20 페이지), 설정 (8 페이지), 설정 (10 페이지), 설정 (18 페이지)

페이지 인쇄
DG FPGA 설정
dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
8) Check LED status on FPGA board. The description of LED is as follows.
GPIO LED
0
1
2
3
9) After programming completely, LED[0] and LED[1] turn ON until finishing PCIe
initialization process. After that, LED[1] changes to OFF when PCIe completes
initialization process.
15-Jul-21
Table 2-1 LED Definition
ON
Normal operation
System is busy
IP Error detect
Data verification fail Normal operation
Figure 2-10 LED status after finishing PCIe initialization
1) PCIe Clock or system Clock is not locked.
2) Reset button is pressed.
Idle status
Normal operation
OFF
Page 12