Avtron HS35A Petunjuk Manual

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Konverter Media Avtron HS35A. Avtron HS35A 7 halaman. 1/2 inch to 1 inch [12mm-25mm] hollow shaft

Halaman Cetak

Nidec-Avtron Makes the Most Reliable Encoders in the World

8 9 0 1 E . P L E A S A N T VA L L E Y R O A D • I N D E P E N D E N C E , O H I O 4 4 1 3 1 - 5 5 0 8

T E L E P H O N E : ( 1 ) 2 1 6 - 6 4 2 - 1 2 3 0 • F A X : ( 1 ) 2 1 6 - 6 4 2 - 6 0 3 7

E - M A I L : t a c h s @ n i d e c - a v t r o n . c o m • W E B : w w w . a v t r o n e n c o d e r s . c o m

DESCRIPTION

The Avtron Model HS35A Hollow Shaft Rotary Incremental Encoder is a

speed and position incremental transducer (also known as tachometer

or rotary pulse generator). When mounted to a motor or machine, its

output is directly proportional to shaft position (pulse count) or speed

(pulse rate). The HS35A operates down to zero speed and can be used

for both control and instrumentation applications.

The HS35A employs a hollow shaft and clamping collar to lock the

encoder to the shaft. A high-performance resin hollow shaft insert

provides electrical isolation from motor shaft currents and permits

models to fit a broad range of shaft sizes from 1/2" to 1" [12mm -

20mm]. An anti-rotation bracket prevents rotation of the encoder while

allowing for shaft end float and axial movement. An optional protective

basket kit offers additional protection from impact and motor lifting

damage.The HS35A encoder offers 2Ø outputs (A,B) 90° apart for

direction sensing (A Quad B), with complements (A,B) and with

marker pulse and complement (Z,Z)

INSTALLATION CONSIDERATIONS

See page 3 and drawing on last page for shaft engagement rules.

Shaft may include keyway, but should not be flatted.

The HS35A offers optional Avtron flexible anti-rotation tethers/

brackets which will permit the encoder to tolerate ±0.1" of shaft end

float/axial movement. Select the proper tether for the application from

the table below.

CAUTION

Be careful not to damage clamping fingers of hollow

shaft during handling. Do not tighten clamping collar

before installation onto motor shaft.

HS35A PART NUMBERS AND AVAILABLE OPTIONS

Line

Model

PPR

Driver

HS35A

1- 5-28V

G- 100

5- 2500

(7272)

K- 200

8- 4000

2- 5-28V,

L- 240

D- 4096

open

M- 250

9- 5000

collector

Q- 500

Special

(7273)

R- 512

4- 5-28V in,

S- 600

5V out

W- 1000

(7272)

Y- 1024

Z- 1200

3- 2000

4- 2048

Only available with MS 6 and 7 pin connectors

All dimensions are in inches [millimeters].

Specifications and features are subject to

change without notice.

*Requires option code "00W"

Bore Options

Connector Options

0- Non-std.

Q- 14mm

W- 18" flex. cable

B- 1/2

R- 15mm

Y- 18" flex. cable BEI

C- 5/8"

S- 16mm

wire colors

D- 3/4"

V- 19mm

E- 7/8"

W- 20mm

F- 1"

Y- 25mm

P- 12mm

U- Universal 1/2" to

7/8"

(all U.S. inserts)

Z- Universal 12mm to

20mm

(all metric inserts)

10 Pin MS

A- w/o plug (std. phasing)

E- w/o plug (std. phasing)

B- w/o plug (Dynapar

F- w/o plug (Dynapar

HS35 phasing)

C- "A" w/ plug

G- "E" w/ plug

D- "B" w/ plug

H- "F" w/ plug

HS35A

Equipment Needed for Installation

Provided

HS35A Encoder

Clamping Collar

WARNING

Installation should be performed only by qualified

personnel. Safety precautions must be taken to ensure

machinery cannot rotate and all sources of power are

removed during installation.

WARNING

Be certain to identify thread locker and anti-seize

compound correctly. Using anti-seize in place of

thread locker can cause mechanical failure leading to

equipment failure, damage, and harm to operators.

Mounting

Protection

Style

U- Universal

0- None

End-of-Shaft

1- Basket

& Thru Shaft

Connector Options

6 Pin MS

7 Pin MS

J- w/o plug (std. phasing)

K- w/o plug (Dynapar

HS35 phasing)

M- "J" w/ plug

N- "K" w/ plug

Encoder

Instructions

HS35A

1/2" to 1" [12mm-25mm]

HOLLOW SHAFT

Optional

Not Provided

Anti-Rotation

#2 Phillips Screwdriver

Tether Kit

5/32" Hex Wrench (US)

Shaft Sizing Insert

3mm Hex Wrench (Metric)

(T-Handle Style)

Mating MS Cable

Connector

Caliper Gauge

Dial Indicator Gauge

Protective Basket Kit

7/16", 9/16", 5/8", 3/4", 10mm

Wrenches (tether options)

Anti-Rotation

Channels

Tether Options

–

X- None

A- A,A

,B,B

–

A- Fan cover, 1/4-20

Z,Z

–

B- Fan cover, 5/16-18

B- A,A

,B,B

–

C- Fan cover, 3/8-16

D- A,A

D- Fan cover, all

E- A,B,Z

E- 4.5" or 6.75" C-Face

F- A,B

F- 8.5" C-Face

M- 4.5" C-Face or Fan

Cover

R- Pin and block

U- Universal

(all tether options)

8 Pin M12

10 Pin Mini-twist lock*

T- w/o plug (Turck Pinout)

R- 10 pin mini twist lock

U- w/o plug (US Pinout)

S- 10 pin mini twist lock

Special

Features

–

000- None

9xx- Specify

–

cable length

xx=feet (use w/

option "W")

00W- Connector

on cable

w/o plug (bulkhead)

on cable*