Dell PowerEdge 2650 Panduan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 2650. Dell PowerEdge 2650 26 halaman. Activating the integrated raid controller
Juga untuk Dell PowerEdge 2650: Instal Manual (32 halaman), Pembaruan Informasi (14 halaman), Panduan Instalasi (20 halaman), Instal Manual (40 halaman), Manual Penggantian (28 halaman), Petunjuk Manual (8 halaman), Manual (42 halaman), Manual (15 halaman), Manual (42 halaman)

Dell PowerEdge 2650 Panduan Instalasi
1-8
Rack Installation Guide

Installing the Slide Assemblies in the Rack

NOTE: If the slide assemblies were preinstalled by Dell, you can skip this section.
You must allow 2 U (3.5 inches) of vertical space for each system you install in the
rack.
NOTE: The vertical rails of the rack are marked by small indentations in 1-U
increments (see Figure 1-6).
1 U (1.75 inches)
Figure 1-6. One Rack Unit
For more information about requirements for installing components in a Dell rack, see
the Dell Rack Advisor software available on the Dell Web site at
http://support.dell.com.
CAUTION: If you are installing more than one system, install the slide
assemblies so that the first system is installed in the lowest available posi-
tion in the rack.
To install the slide assemblies in the rack, perform the following steps:
1.
Place the front of the template on the vertical rails at the front of the rack where
you want to install the system.
Ensure that the printing on the template identifies the side facing outward as the
template front.