Dell PowerEdge 4x00 Series Panduan Instalasi - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 4x00 Series. Dell PowerEdge 4x00 Series 28 halaman. Rack installation guide
Juga untuk Dell PowerEdge 4x00 Series: Pemasangan Rak (37 halaman), Panduan Pengguna (42 halaman), Pemasangan Rak (34 halaman), Panduan Instalasi (37 halaman)
Halaman Cetak
1-14
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
Removing the Front Bezel
To remove the system front bezel, perform these steps:
1.
Remove the system cover (see Figure 1-12).
Figure 1-12. Removing the System Cover
a.
Turn the keylock on the back edge of the cover to the unlocked position.
b.
Slide the cover about a centimeter (half an inch) toward the back of the
system.
c.
Grasping the top of the cover at both ends, lift it away from the chassis.
2.
With your fingertips, gently pry loose the four tabs along the right edge of the
bezel, and disengage the three clips on the opposite edge from the chassis
(see Figure 1-13).
3.
Rotate the bezel to the left to disengage and remove it.
keylock
system cover