Dell EMC Integrated Data Protection Appliance DP4400 Panduan Pemasangan Perangkat Keras - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Penyimpanan Dell EMC Integrated Data Protection Appliance DP4400. Dell EMC Integrated Data Protection Appliance DP4400 18 halaman. Emc integrated data protection appliance
Halaman Cetak
- 1. Table of Contents
- 2. Installation Overview
- 3. Prepare the Site and Unpack the System
- 4. Install Network Validation Tool
- 5. Install the Rails
- 6. Secure the Rails to the Cabinet
- 7. Install the System in the Cabinet
- 8. Install the Bezel
- 9. Connect the System to the Network
- 10. Connect the Power Cables and Power on
- 11. Configure Idrac
- 12. Installing the Dataprotection-ACM Pre-Installation Patch
- 13. Launch the Appliance Configuration Manager
- 14. Additional Resources
Hardware Installation Guide
Install the bezel
Integrated Data Protection Appliance DP4400 2.4 Hardware Installation Guide
10
Figure 6 Slide the system into the cabinet
Procedure
1. Align and insert the right end of the bezel onto the system.
2. Press the release button and fit the left end of the bezel onto the system.
3. Lock the bezel by using the key.