Dell EMC Integrated Data Protection Appliance DP4400 Panduan Pemasangan Perangkat Keras - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Penyimpanan Dell EMC Integrated Data Protection Appliance DP4400. Dell EMC Integrated Data Protection Appliance DP4400 18 halaman. Emc integrated data protection appliance
Halaman Cetak
- 1. Table of Contents
- 2. Installation Overview
- 3. Prepare the Site and Unpack the System
- 4. Install Network Validation Tool
- 5. Install the Rails
- 6. Secure the Rails to the Cabinet
- 7. Install the System in the Cabinet
- 8. Install the Bezel
- 9. Connect the System to the Network
- 10. Connect the Power Cables and Power on
- 11. Configure Idrac
- 12. Installing the Dataprotection-ACM Pre-Installation Patch
- 13. Launch the Appliance Configuration Manager
- 14. Additional Resources
Hardware Installation Guide
Installation overview
Integrated Data Protection Appliance DP4400 2.4 Hardware Installation Guide
2
This guide is designed for personnel who install, configure, and maintain the Integrated
Data Protection Appliance DP4400. To use this hardware publication, you should be
familiar with digital storage equipment and cabling.
Before you begin
Gather the required materials and configure your network environment as specified in
Prepare the site and unpack the system
Use the following sequence of actions as a guide to install the system.
Procedure
1.
Install
and
secure
2.
Install the system in the cabinet
3.
Connect the system to the
4.
Connect the power cables and power
Results
The system is ready for initial configuration. To continue setup, refer to the Integrated
Data Protection Appliance DP4400 Getting Started Guide . For additional help and
resources, review the information in
on page 3.
the rails.
and
attach the
network.
on.
Additional resources
bezel.
on page 16.