Miele PT 7137 WP Vario Komisioning, Bagan Program dan Pengaturan - Halaman 20
Jelajahi secara online atau unduh pdf Komisioning, Bagan Program dan Pengaturan untuk Pengering Miele PT 7137 WP Vario. Miele PT 7137 WP Vario 28 halaman.
Juga untuk Miele PT 7137 WP Vario: Rencana Instalasi (11 halaman)
Halaman Cetak
Settings
Time
First decide whether you want the
clock displayed as a 24 hour or 12
hour clock, or not to display it at all.
Then set the current time of day.
– 24 h clock or 12 h clock
Once the clock display has ben
selected, the time of day can be set.
To set the time (of day)
Use the multi-function selector to
select the current hour and confirm
your selection.
Use the multi-function selector to
select the current minutes and
confirm your selection.
– Time not displayed
If Delay start is activated, (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
Contrast
Brightness
There are ten different display contrast
and display brightness settings.
The bar chart shows you the setting.
– Factory default: medium
Standby
To save energy, the display goes out
after 10 minutes and the Start button
flashes slowly.
20
The display is switched on again by
touching the multi-function selector or
or one of the short-cut buttons, without
any effect on any programme that is
running.
– On
Standby comes on:
. . . if a programme is not selected.
. . . after the Start button has been
pressed in a programme that is
running.
. . . after the end of a programme.
– Not in current programme (factory
default setting)
Standby is switched on if no
programme selection is made after
the end of a programme.
– Off
The display remains on all the time.
Please note:
This setting results in increased
energy consumption.