Miele PT 7137 WP Vario Commissioning, Programme Chart And Settings - Page 20

Browse online or download pdf Commissioning, Programme Chart And Settings for Dryer Miele PT 7137 WP Vario. Miele PT 7137 WP Vario 28 pages.
Also for Miele PT 7137 WP Vario: Installations Plan (11 pages)

Print Page

Settings

Time

First decide whether you want the

clock displayed as a 24 hour or 12

hour clock, or not to display it at all.

Then set the current time of day.

– 24 h clock or 12 h clock

Once the clock display has ben

selected, the time of day can be set.

To set the time (of day)

 Use the multi-function selector to

select the current hour and confirm

your selection.

 Use the multi-function selector to

select the current minutes and

confirm your selection.

– Time not displayed

If Delay start is activated, (see

Settings Delay start), then the timer

will only show the option Start in or

Finish in in hours/minutes.

Contrast

Brightness

There are ten different display contrast

and display brightness settings.

The bar chart shows you the setting.

– Factory default: medium

Standby

To save energy, the display goes out

after 10 minutes and the Start button

flashes slowly.

The display is switched on again by

touching the multi-function selector or

or one of the short-cut buttons, without

any effect on any programme that is

running.

– On

Standby comes on:

. . . if a programme is not selected.

. . . after the Start button has been

pressed in a programme that is

running.

. . . after the end of a programme.

– Not in current programme (factory

default setting)

Standby is switched on if no

programme selection is made after

the end of a programme.

– Off

The display remains on all the time.

Please note:

This setting results in increased

energy consumption.