AQUAPHOR RO-101S Panduan Pemilik - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Penyaringan Air AQUAPHOR RO-101S. AQUAPHOR RO-101S 20 halaman. Reverse osmosis system
Juga untuk AQUAPHOR RO-101S: Panduan Pemilik (20 halaman), Panduan Pemilik (16 halaman)
8. Slotted plug installation
Install the slotted plug into the JG tube 3/8" (9.5 mm) tube to a stop, as shown on figure 10.
1.
Remove the clip from the JG tube 3/8" socket of the water filter, and then connect this tube end to it
2.
(see the connection of the JG tubes on figures 6 and 7).
Attention! The set includes three slotted plugs: one for installation and two are for spares.
9. Starting RO-101S
To start RO-101S, you must connect the supply tube and carry out the flushing procedure of filter and
membrane cartridges.
Step 1. Connect the incoming tubes according to the diagram
below (figure 11). The tube connection scheme is illustrated
on figure 6
AQUAPHOR RO-101S REVERSE OSMOSIS SYSTEM
Slotted plug
Figure 10. Slotted plug installation
Figure 11. Incoming tubes connection
13