- ページ 13

浄水器 AQUAPHOR RO-101SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AQUAPHOR RO-101S 20 ページ。 Reverse osmosis system
AQUAPHOR RO-101S にも： オーナーズマニュアル (20 ページ), オーナーズマニュアル (16 ページ)

ページを印刷する
AQUAPHOR RO-101S オーナーズマニュアル

8. Slotted plug installation

Install the slotted plug into the JG tube 3/8" (9.5 mm) tube to a stop, as shown on figure 10.
1.
Remove the clip from the JG tube 3/8" socket of the water filter, and then connect this tube end to it
2.
(see the connection of the JG tubes on figures 6 and 7).
Attention! The set includes three slotted plugs: one for installation and two are for spares.

9. Starting RO-101S

To start RO-101S, you must connect the supply tube and carry out the flushing procedure of filter and
membrane cartridges.
Step 1. Connect the incoming tubes according to the diagram
below (figure 11). The tube connection scheme is illustrated
on figure 6
AQUAPHOR RO-101S REVERSE OSMOSIS SYSTEM
Slotted plug
Figure 10. Slotted plug installation
Figure 11. Incoming tubes connection
13