AQUAPHOR RO-101S 소유자 매뉴얼 - 페이지 13

{카테고리_이름} AQUAPHOR RO-101S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR RO-101S 20 페이지. Reverse osmosis system
AQUAPHOR RO-101S에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄
AQUAPHOR RO-101S 소유자 매뉴얼

8. Slotted plug installation

Install the slotted plug into the JG tube 3/8" (9.5 mm) tube to a stop, as shown on figure 10.
1.
Remove the clip from the JG tube 3/8" socket of the water filter, and then connect this tube end to it
2.
(see the connection of the JG tubes on figures 6 and 7).
Attention! The set includes three slotted plugs: one for installation and two are for spares.

9. Starting RO-101S

To start RO-101S, you must connect the supply tube and carry out the flushing procedure of filter and
membrane cartridges.
Step 1. Connect the incoming tubes according to the diagram
below (figure 11). The tube connection scheme is illustrated
on figure 6
AQUAPHOR RO-101S REVERSE OSMOSIS SYSTEM
Slotted plug
Figure 10. Slotted plug installation
Figure 11. Incoming tubes connection
13