HP ProCurve 1600M Panduan Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 28 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Instalasi (46 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

Connectors

The ports on the 10/100-TX GL Module are compatible with the IEEE

802.3 10Base-T and 802.3u 100Base-TX standards and accept the 10 Mbps

or 100 Mbps cables listed below.

The ports on the 100/1000-T GL Module and the 100/1000-T Trans-

ceiver, which can be installed in the Gigabit Transceiver GL Module,

are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab

1000Base-T standards, and accept the 100 Mbps or 1000 Mbps cables listed

below. For 1000 Mbps operation, Category 5E twisted-pair cable is

recommended.

The port on the 100-FX SC Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3u 100Base-FX standard. It accepts the

multimode fiber-optic cables for 100Base-FX described on the next page.

The port on the Gigabit-SX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 850 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-SX standard. It accepts the low

metal content, multimode fiber-optic cables for Gigabit-SX described on

the next page.

The port on the Gigabit-LX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-LX standard. It accepts the low

metal content, single mode or multimode fiber-optic cables for

Gigabit-LX described on the next page.

Twisted-Pair

10 Mbps Operation

100 Mbps Operation

1000 Mbps Operation Category 5E 100-ohm differential UTP or STP cable,

Category 3, 4, or 5 100-ohm differential unshielded twisted-

pair (UTP) or shielded twisted-pair (STP) cable, complying

with IEEE 802.3 10Base-T specifications, fitted with RJ-45

connectors

Category 5 100-ohm differential UTP or STP cable,

complying with IEEE 802.3u 100Base-TX specifications,

fitted with RJ-45 connectors

complying with IEEE 802.3ab 1000Base-T specifications,

fitted with RJ-45 connectors

(please see "Note on 1000Base-T Cable Requirements",

below)

Specifications