HP ProCurve 1600M Manual de instalación - Página 23

Connectors

The ports on the 10/100-TX GL Module are compatible with the IEEE

802.3 10Base-T and 802.3u 100Base-TX standards and accept the 10 Mbps

or 100 Mbps cables listed below.

The ports on the 100/1000-T GL Module and the 100/1000-T Trans-

ceiver, which can be installed in the Gigabit Transceiver GL Module,

are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab

1000Base-T standards, and accept the 100 Mbps or 1000 Mbps cables listed

below. For 1000 Mbps operation, Category 5E twisted-pair cable is

recommended.

The port on the 100-FX SC Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3u 100Base-FX standard. It accepts the

multimode fiber-optic cables for 100Base-FX described on the next page.

The port on the Gigabit-SX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 850 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-SX standard. It accepts the low

metal content, multimode fiber-optic cables for Gigabit-SX described on

the next page.

The port on the Gigabit-LX Transceiver, which can be installed in the

Gigabit Transceiver GL Module, transmits at 1300 nm wavelength, and

is compatible with the IEEE 802.3z Gigabit-LX standard. It accepts the low

metal content, single mode or multimode fiber-optic cables for

Gigabit-LX described on the next page.

Twisted-Pair

10 Mbps Operation

100 Mbps Operation

1000 Mbps Operation Category 5E 100-ohm differential UTP or STP cable,

Category 3, 4, or 5 100-ohm differential unshielded twisted-

pair (UTP) or shielded twisted-pair (STP) cable, complying

with IEEE 802.3 10Base-T specifications, fitted with RJ-45

connectors

Category 5 100-ohm differential UTP or STP cable,

complying with IEEE 802.3u 100Base-TX specifications,

fitted with RJ-45 connectors

complying with IEEE 802.3ab 1000Base-T specifications,

fitted with RJ-45 connectors

(please see "Note on 1000Base-T Cable Requirements",

below)

Specifications