HP ProCurve 1600M Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 28 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Suplemen Manual (28 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Instalasi (46 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

HP ProCurve Switch 2424M

Gigabit Stacking Module

Description

The HP ProCurve Switch 2424M Gigabit Stacking Module is a component that

you can add to an HP ProCurve Switch 2424M to provide stacking between

Switch 2424Ms and a variety of other network connectivity options.

handle to assist module

insertion and extraction

Features: The HP Gigabit Stacking Module has the following features:

two transceiver slots for installing any of the HP ProCurve Gigabit trans-

ceivers:

• Gigabit-SX Transceiver (HP J4131A)

• Gigabit-LX Transceiver (HP J4132A)

• Gigabit Stacking Transceiver

(part of the Gigabit Stacking Kit—HP J4116A)

auto-enabled ports—the ports are all configured to be ready for network

operation as soon as a viable network cable is connected

auto-configuration—a default configuration is applied to the module when

the switch is powered on and the module passes self test; this default

configuration works well for most network installations

LEDs that provide information on the link status, network activity, connec-

tion speed, and communication mode (half or full duplex)

"hot swap" operation—you can add a module or replace a module without

having to shut down the switch (changing the module type in a given slot

does require a switch reset)

transceiver slots

Description

Link and Mode LEDs