HP ProCurve 1600M Installation Manual - Page 7

Browse online or download pdf Installation Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 28 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Reviewer's Manual (27 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), User Manual (8 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Installation Manual (12 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Installation Manual (46 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page

HP ProCurve Switch 2424M

Gigabit Stacking Module

Description

The HP ProCurve Switch 2424M Gigabit Stacking Module is a component that

you can add to an HP ProCurve Switch 2424M to provide stacking between

Switch 2424Ms and a variety of other network connectivity options.

handle to assist module

insertion and extraction

Features: The HP Gigabit Stacking Module has the following features:

two transceiver slots for installing any of the HP ProCurve Gigabit trans-

ceivers:

• Gigabit-SX Transceiver (HP J4131A)

• Gigabit-LX Transceiver (HP J4132A)

• Gigabit Stacking Transceiver

(part of the Gigabit Stacking Kit—HP J4116A)

auto-enabled ports—the ports are all configured to be ready for network

operation as soon as a viable network cable is connected

auto-configuration—a default configuration is applied to the module when

the switch is powered on and the module passes self test; this default

configuration works well for most network installations

LEDs that provide information on the link status, network activity, connec-

tion speed, and communication mode (half or full duplex)

"hot swap" operation—you can add a module or replace a module without

having to shut down the switch (changing the module type in a given slot

does require a switch reset)

transceiver slots

Description

Link and Mode LEDs