HP ProCurve 1600M Manual de instalación - Página 7

HP ProCurve Switch 2424M

Gigabit Stacking Module

Description

The HP ProCurve Switch 2424M Gigabit Stacking Module is a component that

you can add to an HP ProCurve Switch 2424M to provide stacking between

Switch 2424Ms and a variety of other network connectivity options.

handle to assist module

insertion and extraction

Features: The HP Gigabit Stacking Module has the following features:

two transceiver slots for installing any of the HP ProCurve Gigabit trans-

ceivers:

• Gigabit-SX Transceiver (HP J4131A)

• Gigabit-LX Transceiver (HP J4132A)

• Gigabit Stacking Transceiver

(part of the Gigabit Stacking Kit—HP J4116A)

auto-enabled ports—the ports are all configured to be ready for network

operation as soon as a viable network cable is connected

auto-configuration—a default configuration is applied to the module when

the switch is powered on and the module passes self test; this default

configuration works well for most network installations

LEDs that provide information on the link status, network activity, connec-

tion speed, and communication mode (half or full duplex)

"hot swap" operation—you can add a module or replace a module without

having to shut down the switch (changing the module type in a given slot

does require a switch reset)

transceiver slots

Description

Link and Mode LEDs