HP ProCurve 1600M Suplemen Manual - Halaman 19

Jelajahi secara online atau unduh pdf Suplemen Manual untuk Beralih HP ProCurve 1600M. HP ProCurve 1600M 28 halaman. Redundant power supply
Juga untuk HP ProCurve 1600M: Lembar Spesifikasi (12 halaman), Baca Saya Terlebih Dahulu (8 halaman), Panduan Peninjau (27 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (2 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (28 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengguna (8 halaman), Baca Saya Terlebih Dahulu (16 halaman), Instalasi dan Penghapusan (2 halaman), Panduan Instalasi (12 halaman), Panduan Perencanaan dan Pelaksanaan (40 halaman), Petunjuk Pembongkaran Akhir Masa Pakai Produk (2 halaman), Panduan Instalasi (46 halaman), Panduan Diagnostik (2 halaman), Petunjuk Pembongkaran (2 halaman)

Displaying VRRP Configuration Information and Statistics

You can use the CLI or Web management interface to display configuration information and statistics for VRRP.

To display VRRP configuration information for an HP routing switch, use one of the following methods.

USING THE CLI

To display VRRP configuration information for a router, enter the following command:

Router1(config)# show ip vrrp

Here is an example of the information displayed by this command:

Total number of VRRP routers defined: 1

Interface ethernet e 1/6

auth-type no authentication

VRID 1

state master

administrative-status activated

mode owner

priority 255

current priority 255

hello-interval 1 sec

ip-address 192.53.5.1

USING THE WEBMANAGEMENT INTERFACE

To display VRRP configuration information, select VRRP from the System configuration sheet. A panel such as

the ones shown in Figure 5 and Figure 6 is displayed.

•

To modify an entry, select Modify.

•

To delete an entry, select Delete.

NOTE: If you delete the real IP address associated with a VRRP entry, the VRRP entry also is deleted

automatically.

Configuring VRRP