HP StorageWorks 2/32 - SAN Switch Catatan Rilis - Halaman 4

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32 halaman. Fabric manager version 3.0.x release notes
Juga untuk HP StorageWorks 2/32 - SAN Switch: Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Catatan Rilis (48 halaman), Panduan Petunjuk Instalasi (6 halaman), Catatan Rilis (14 halaman), Catatan Rilis (4 halaman)

Firmware Version 4.0.2b Overview

The hp StorageWorks SAN Switch 2/32 ships with Version 4.0.2b firmware.

Firmware improvements per this release involve:

•

link initialization

•

API

•

SNMP

•

help

•

firmware download

•

web server security.

Read this section before upgrading/restoring switch firmware.

Verify that a Windows NT or 2000 FTP Server is Installed

An FTP server must be installed and running when performing the Telnet command

configUpload on a Windows NT or 2000 system. If you do not have a Microsoft

Windows NT or 2000 FTP service previously installed on your system, you need to

install it.

Use the following steps to install and configure a Windows NT or 2000 FTP server.

1. Create a folder for the switch firmware and configuration files.

2. Install the Windows NT or 2000 FTP server on your system from your Windows

installation CD.

NOTE: If you only use the FTP server for the firmware and configuration loads, you can

specify the folder created in Step 1 as the FTP Publish Directory.

3. Open the Internet Service Manager Tool.

4. Issue the configUpload command. Save the configuration.

SAN switch 2/32, version 4.0.2b release notes